Tyler Mingione

I have loved writing for as long as I can remember. There’s just nothing better than getting entranced by a good story. I am unapologetically crazy about grammar, an avid dog lover, and someone who never wants to stop learning.


April 30, 2020

How to Install High Clearance A-Arms on a Honda Talon 1000R

If you want to know how to install SuperATV's High Clearance A-Arms on your Honda Talon 1000R, you've come to the right place.
April 28, 2020

How to Install High Clearance Forward Offset A-Arms on a Honda Pioneer 1000-5

Get your new High Clearance Forward Offset A-Arms installed in a jiffy with a little help from our very own install expert, Braden.
April 16, 2020

How to Install High Clearance Forward Offset A-Arms on the Polaris RZR PRO XP

Need some help getting your High Clearance Forward Offset A-Arms installed on your Polaris RZR PRO XP? Braden's here to walk you through every step.
April 13, 2020

How to Change, Replace, and Inspect the Drive Belt on a Kawasaki Teryx

Keeping your clutch belt in good condition will make every ride smoother. Kristen's here to make changing the belt on your Teryx easy.
April 8, 2020

How to Install a Plug & Play Turn Signal Kit on a Can-Am Defender

Ready to get street legal? The first step is to get your new turn signal kit installed. Sound hard? Braden's here to walk you through it.
March 24, 2020

How to Install Rhino Driveline Prop Shaft on Can-Am Maverick X3

No need to be intimidated by a prop shaft install. Watch as Braden shows you just how easy the process is with SuperATV's Rhino Driveline Prop Shafts.
March 19, 2020

How to Install 2.5″ Lift Kit on CFMOTO ZForce 1000

Let us walk you through this easy installation of SuperATV's 2.5" Lift Kit for your CFMOTO ZForce 1000. You'll be riding in no time!
February 13, 2020

How to Install Whip Lights on Can-Am Maverick X3

Created: 2/13/2020Length: 10:19 Transcript The first thing we’re going to do is remove our passenger side seat and then this trim panel, as well as the one on the opposite side, and then this one right here. So we’re going to grab ahold of this panel, pull it straight out, and lift it up. And then we’ll grab this one […]
November 12, 2019

How to Install 4″ GDP Portals on a Polaris RZR Turbo S

Length: 22:19Created: November 12, 2019 Transcript Hey everybody. Today I’m going to be showing you how super easy it is to install SuperATV’s 4″ GDP Portals on this Polaris RZR Turbo S. The first thing that you’re going to want to do is remove your cotter pin from the castle nut. Then remove your castle nut. We’ve already removed the […]