Off-road Atlas LogoOff-road Atlas Logo
  • Behind The Wheel
  • How-To
  • News
  • Stories

How to Check and Clean the Air Filter on a Polaris RZR PRO XP

By Megan Randall | How-To on February 24, 2020
2M READ
Share
0

Length: 3:23
Created: February 24, 2020

Transcript

Hey guys! Is it time to change your air filter on your PRO XP? Today I’m gonna show you how to do that. My name’s Kristen, and this is Maintenance Matters.

First thing we’re gonna do is remove the seats.

Now you’re gonna remove this access panel. You’ll turn these clips. Slide your seat belts out of the way.

This is your air box. You’ll go ahead and loosen the clips on the top and the sides, and slide that out of the way. Go ahead and slide your air filter off. There’ll be a ring on there when it comes out, so make sure that stays intact.

When checking your air filter you’ll wanna check for any damaged or wet fins, any extra dirt or dust that’s stuck on there. If there’s a lot of dust inside of your box that means your air filter is probably dirty, too. You can contact your dealership to get a new one. This is a fairly new machine, so as you can see, it’s a pretty brand-new filter. No dirt, no dust, the fins are in good shape.

We’ll just take an air gun, blow it from the inside out, clean out anything that we might not be seeing.

Set your air filter aside. Now we’ll take a clean rag, wipe out the inside of your air box. Wipe down the inside of your air box lid. Check your seal—make sure it’s in good shape. If not, contact your dealership. They’ll be able to get you a new one.

Now we can reinstall our filter. Slide it in. Make sure it seats up against these fins. Reinstall your lid.

Now you can reinstall your access panel and seats and you’re good to go. Thanks for watching. Happy riding!

RELATED CONTENT: air filter6 machine maintenance53 Polaris RZR PRO XP26
Share
0

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *



Related

  • How to Install a Heavy-Duty Rhino Driveline Prop Shaft on a Polaris RZR XP Turbo

    How-To | 8 MIN READ
  • How to Install a 30" LED Light Bar on a Polaris RZR XP 1000

    How-To | 8 MIN READ
  • How to Install a 4" GDP Portal Gear Lift on a Polaris RZR PRO XP

    How-To | 13 MIN READ
  • How to Install a 4500 Lb. Black Ops Winch on a Polaris RZR

    How-To | 12 MIN READ
  • How to Service, Rebuild, and Maintain 6" GDP Portals

    How-To | 8 MIN READ
  • How to Install a High Gear Kit and Clutch Kit on a Polaris RZR XP Turbo

    How-To | 18 MIN READ
  • How to Install a Winch-Ready Bumper and Black Ops Winch on a Polaris Ranger XP 1000

    How-To | 12 MIN READ
  • How to Install a 6" GDP Portal Gear Lift on a Can-Am Defender

    How-To | 17 MIN READ
  • How to Install a 4500 Lb. Black Ops Winch and Winch Mount on a Honda Talon

    How-To | 12 MIN READ
Copyright © 2021 SuperATV. All rights reserved.
SHOP NOW