Off-road Atlas LogoOff-road Atlas Logo
  • Behind The Wheel
  • How-To
  • News
  • Stories

How to Inspect and Change the Air Filter on a Kawasaki Teryx4

By Megan Randall | How-To on March 9, 2020
<1M READ
Share
0

Length: 1:54
Created: March 9, 2020

Transcript

[0:00] Is it time to change the air filter on your Kawasaki Teryx? Today I’m going to show you how to do that. My name is Kristen and this is Maintenance Matters.

You’re gonna start by removing your hood.

Next, we’re gonna loosen the clips on your airbox lid. Slide your airbox lid off. It’ll have air hoses connected to it—just set those aside.

[0:32] Next, grab your air filter. It’s a loose fit, so it should come out pretty easily. Go ahead and wipe out your airbox. Make sure there’s no dirt, leaves, or any kind of debris in there.

Take out your lid. Check the seal around the lid to make sure it’s intact and in good shape. If not, you can get a new air filter kit with those seals in it from your dealership.

[0:59] Next, we’re gonna inspect our air filter. You’ll be looking for any kind of damage or wetness, or any kind of dirt, leaves, or debris stuck inside. This one’s pretty new, so it’s in good shape.

We’ll just use an air hose to blow it from the inside out.

[1:23] Now you can reinstall your air filter. Make sure it slides into the grooves correctly.

You can slide your airbox lid back into place, close the clips, and make sure your air hoses are still intact. Now you can reinstall your hood.

And that’s how easy it is to change the air filter on the Kawasaki Teryx. Thanks for watching!

RELATED CONTENT: air filter6 Kawasaki Teryx9 machine maintenance53
Share
0

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *



Related

  • How to Install a Heavy-Duty Carrier Bearing on a Polaris Ranger Crew

    How-To | 11 MIN READ
  • How to Maintain and Service SuperATV's 8" GDP Portals

    How-To | 8 MIN READ
  • How to Install a 4" GDP Portal Gear Lift on a Polaris RZR PRO XP

    How-To | 13 MIN READ
  • How to Service, Rebuild, and Maintain 6" GDP Portals

    How-To | 8 MIN READ
  • The Slow and Steady Rise of the Kawasaki Teryx

    Behind The Wheel | 7 MIN READ
  • How to Install a 6" GDP Portal Gear Lift on a Can-Am Defender

    How-To | 17 MIN READ
  • How to Install a High Gear Kit and Clutch Kit on a Polaris RZR XP Turbo

    How-To | 18 MIN READ
  • How to Install a Heavy-Duty Rhino Driveline Prop Shaft on a Polaris RZR XP Turbo

    How-To | 8 MIN READ
  • How to Install a Winch-Ready Bumper and Black Ops Winch on a Polaris Ranger XP 1000

    How-To | 12 MIN READ
Copyright © 2021 SuperATV. All rights reserved.
SHOP NOW