Length: 2:49
Created: April 27, 2022
If you’re a RZR owner, you know the struggle of trying to park your machine on an incline. It’s really hard on the transmission and sometimes you can’t even get it back into gear. SuperATV developed a Polaris RZR Brake Lock. It may sound like a hard install, but we’re going to show you how super easy it is to install on this Polaris RZR Turbo S. Let’s get right to it.
[00:40] The first thing to do is locate the brake pedal on the driver’s side. If you look closely behind the brake pedal, you will see four studs. There are two nuts on the top studs and two nuts on the bottom. There is one here as well as a nut here. Remove the two nuts on the bottom.
[01:17] Once you’ve removed the two bottom nuts, take the SuperATV parking brake and slide it onto the studs where the nuts were attached. Then reinstall the nuts.
[01:47] Fully tighten the nuts.
[02:00] Now test the functionality. As you can see, the brake pedal is locked. To release it, push down on the pedal and it releases the brake. If you’ve parked your machine somewhere and you’re worried about someone trying to take it, there’s a hole here where you can add a lock.
[2:29] That’s all there is to it to install SuperATV’s parking brake on your Polaris RZR Turbo S. Be sure to pick yours up today at SuperATV.com. Don’t forget to like, comment, and subscribe. Thanks for watching and we’ll catch you on the next one.