Off-road Atlas LogoOff-road Atlas Logo
  • Behind The Wheel
  • How-To
  • News
  • Stories

How to Install a Frame Stiffener/Gusset Kit on a Polaris RZR Trail 900

By Joe Crisan | How-To on May 21, 2021
<1M READ
Share
0

Length: 3:39
Created: May 21, 2021

Transcript

What’s going on, guys? Are you looking to strengthen the frame on your Polaris RZR Trail 900? SuperATV’s got you covered with our Heavy-Duty Frame Stiffener and Gusset Kit.

It’s going to tie everything nice and tight. That way, you don’t have to worry about ripping your lower A-arm tabs off, and it’ll keep you going when you’re on the trail.

We’re gonna show you everything you need to do to install it.

Remove the A-Arm Hardware

[00:47] First, remove all the hardware from the lower A-arms. Remove the bolts and repeat the same steps on the opposite side.

We have the frame stiffener/gusset kit as well as the hardware laid out here. These bolts are a little bit longer than the factory ones. We’ll be replacing all the factory hardware with the provided hardware in the kit.

Install the Frame Stiffener

[01:44] Take the frame stiffener and line it up with the factory frame tabs. Install the frame stiffener. Then, install the hardware.

Give the bolts a little tap here. Sometimes when you add that frame stiffener, it makes them harder to go through.

Make sure the bolts are started so you don’t tear up the threads, and install all of the nylock nuts.

Tighten the Hardware

Fully tighten the hardware after you’ve installed them.

Once all the hardware is fully tightened, that’s all there is to it. To pick up your heavy-duty frame stiffener and gusset kit, be sure to check out our website. Also, be sure to drop a like, comment, and subscribe.

Thanks for watching, and we’ll catch you next time.

RELATED CONTENT: frame stiffeners4 installation256 machine protection22
Share
0

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *



Related

  • How to Install a Clutch Kit on a Polaris RZR Trail S 1000

    How-To | 8 MIN READ
  • How to Install a Glass Windshield on a Polaris RZR Turbo S

    How-To | 3 MIN READ
  • How to Install Tie Rods on a Polaris RZR Trail S 1000

    How-To | 4 MIN READ
  • How to Install a Rack and Pinion on a Polaris RZR Trail S 900/RZR S 1000

    How-To | 6 MIN READ
  • How to Install Inner Fender Guards on a Polaris RZR XP 1000/XP Turbo

    How-To | 3 MIN READ
  • How to Install Fender Flares on a Polaris RZR Trail S 900/RZR Trail S 1000

    How-To | 3 MIN READ
  • How to Install Half Windshield on Polaris RZR Trail 900/S 900/S 1000

    How-To | 2 MIN READ
  • How to Install Scratch-Resistant Full Windshield on Polaris RZR Trail S 900

    How-To | 2 MIN READ
  • How to Install a Spare Tire Carrier on a Honda Talon 1000X-4

    How-To | <1 MIN READ
Copyright © 2021 SuperATV. All rights reserved.
SHOP NOW