Off-road Atlas LogoOff-road Atlas Logo
  • Behind The Wheel
  • How-To
  • News
  • Stories

How to Install a Spare Tire Carrier on a Kawasaki KRX 1000

By Kavan Wright | How-To on July 2, 2020
2M READ
Share
0

Length: 3:36
Created July 2, 2020

Transcript

Have you ever been stranded in the woods or on the trail after blowing a tire? A lot of people have. Well, SuperATV offers a heavy-duty spare tire carrier for the Kawasaki KRX and today we’re going to show you how to get it installed. So Let’s get to it.

First, remove all four screws out of your clamp. We’ve already removed two and loosened the other two so we’ll just completely remove than and set them aside. I’m going to position everything to make it easier to get everything started.

Lining Everything Up

[00:38] Take the spare tire carrier and slide it to the outside and push it up and in. Get it flipped up like this. You can use your air box to help you hold it. Once you get it in position, line up the hardware and get the two screws started that are across from each other.

Now on the opposite side, slide it onto the cage and get all four screws started. The get the last two started on the opposite side.

[02:21] Once you have all of them started, start running them all in with a ratchet or allen wrench. Make sure you close the gap evenly. Once you get the gap closed, go through and fully tighten them in an X pattern. Repeat the steps for the opposite side.

And there you have it. Once you have all your hardware fully tightened, that’s how super quick and easy it is to install SuperATV’s Spare Tire Carrier on this Kawasaki KRX.

For more information on the spare tire carrier or any of SuperATV’s great products, feel free to gives us a call at 855-743-3427 or check us out online at SuperATV.com.

Thanks for watching and we’ll catch you next time.

RELATED CONTENT: installation262 Kawasaki Teryx KRX 100016 spare tire carriers9
Share
0

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *



Related

  • How to Install a Glass Windshield on a Polaris RZR 900

    How-To | 5 MIN READ
  • 33 Must-Have Aftermarket Upgrades for Every UTV Owner

    Behind The Wheel | 14 MIN READ
  • How to Install a Black Ops Winch and Winch Mount on a Polaris RZR PRO XP

    How-To | 6 MIN READ
  • How To Install a Cooler/Cargo Box on a Can-Am Defender

    How-To | 4 MIN READ
  • How to Install a Polaris RZR XP Turbo Carrier Bearing

    How-To | 6 MIN READ
  • How to Install a Rhino Driveline C-Series Prop Shaft in a Polaris RZR XP 4 Turbo

    How-To | 6 MIN READ
  • How to Install a Transmission on a Polaris RZR XP 1000

    How-To | 6 MIN READ
  • How to Install a Black Ops Winch on a Kawasaki Teryx KRX 1000

    How-To | 6 MIN READ
  • How to Install the RIDE System Rear Steering Kit on a Polaris Ranger XP 1000

    How-To | 12 MIN READ
Copyright © 2021 SuperATV. All rights reserved.
SHOP NOW