Off-road Atlas LogoOff-road Atlas Logo
  • Behind The Wheel
  • How-To
  • News
  • Stories

How to Install a Spare Tire Carrier on a Kawasaki Teryx4

By Kavan Wright | How-To on July 6, 2020
<1M READ
Share
0

Length: 2:06
Created: July 6, 2020

Transcript

Have you ever blown a tire on the trail. We all have. Well, SuperATV’s got you covered with their heavy-duty spare tire carrier for the Teryx4 and today we’re going to show you how to get one installed. So let’s get to it.

First, remove these two allen headed screws from the inside. Take the spare tire carrier and slide it on just like this. Then reinstall the screws.

[01:02] Next, grab the hardware. We have a bolt, a spacer, and a nut. Get the spacer lined up with the hole and slide the bolt through. Then put the nut on the inside. Then fully tighten the hardware.

Once all your hardware’s tight, you’re good to go to throw your spare tire on and tighten your lug nuts up.

And that’s how super quick and easy it is to install SuperATV’s spare tire carrier on this Kawasaki Taryx4. For more information on the spare tire carrier or any of SuperATV’s great products, feel free to give us a call at 855-743-3427 or check us out online at SuperATV.com.

Thanks for watching and we’ll catch you next time.

RELATED CONTENT: installation262 Kawasaki Teryx9 spare tire carriers9
Share
0

4 Comments

  1. Avatar for Scott Scott says:
    December 22, 2021 at 4:10 pm

    Can I open my Kawasaki lock box with a 30×10 tire mounted?

    Reply
    • Avatar for Tyler Lichlyter Tyler Lichlyter says:
      December 27, 2021 at 10:38 am

      Hey Scott, thanks for tuning in! Are you referring to the increased height from a larger tire or a spare tire being mounted?

      Reply
  2. Avatar for Scott Scott says:
    December 28, 2021 at 2:25 pm

    I have a larger spare tire I’m looking to mount somewhere. It’s 30×10. I was just wondering if I could open my lockbox(Kawasaki one) and still access it with the tire mounted.
    I have a teryx4. I also like your read bumper and think you should make a swing away tire carrier and fuel can mount. That would be sweet. Like the jeeps and much more useful.

    Reply
    • Avatar for Tyler Lichlyter Tyler Lichlyter says:
      December 29, 2021 at 8:07 am

      It’s honestly hard to say since we’re talking about Kawasaki’s box. If it’s similar to ours, there’s not a ton of room to open our Teryx4 box. I would give your local Kawasaki dealer a shout and see what they have to say. Thanks for tuning in with us, Scott!

      Reply

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *



Related

  • How to Install a Rhino Driveline C-Series Prop Shaft in a Polaris RZR XP 4 Turbo

    How-To | 6 MIN READ
  • How to Install High Clearance Front A-Arms on a Can-Am Maverick

    How-To | 5 MIN READ
  • How to Install the RIDE System Rear Steering Kit on a Polaris Ranger XP 1000

    How-To | 12 MIN READ
  • How to Install a Transmission on a Polaris RZR XP 1000

    How-To | 6 MIN READ
  • How to Install a Polaris RZR XP Turbo Carrier Bearing

    How-To | 6 MIN READ
  • How to Install a Black Ops Winch and Winch Mount on a Polaris RZR PRO XP

    How-To | 6 MIN READ
  • How To Install Honda Talon High-Clearance Trailing Arms

    How-To | 5 MIN READ
  • How to Install a Black Ops Winch on a Kawasaki Teryx KRX 1000

    How-To | 6 MIN READ
  • How To Install a Cooler/Cargo Box on a Can-Am Defender

    How-To | 4 MIN READ
Copyright © 2021 SuperATV. All rights reserved.
SHOP NOW