Created: August 16, 2021
What’s up guys? Are you looking for a half windshield for your Honda Pioneer 520 or Pioneer 500. Well, SuperATV has you covered, and today we’re going to show you how to get one installed. So, let’s get right to it.
[00:33] First, we’ll remove all the contents out of the packing. You’ll take your windshield and lay it up on your machine. Confirm that it fits, and then you’re good to go.
Once that’s done, you’ll go ahead and remove the protective film from both sides.
[00:59] Then we’ll take our seal and apply it all the way across the lower portion of the windshield. After that, you’ll take something to cut with and cut off the excess.
[01:41] Now, we’ll get our windshield installed. Grab it and lay it on the machine like so.
Next, you’ll grab the heady-duty Velcro clamps. You’ll take the strap and slide it through the windshield, through the clamp, and back through the windshield. Make sure the windshield is laying exactly where you want it on the hood. Then you’ll fully tighten your clamp.
Do the exact same thing over here on this side.
That’s all there is to it to install SuperATV’s Half Windshield on this Honda Pioneer 520 or Pioneer 500. Be sure to check us out online to pick yours up today. Also, drop a like, comment, and subscribe. Thanks for watching, and we’ll catch you on the next one.
How to Install a 3-in-1 Windshield on a Can-Am Defender
How to Install Billet Tie Rods on a Polaris RZR PRO XP
How to Install a Flip Down Windshield on a Polaris RZR Trail 900/S 900/S 1000
How to Install a Flip Windshield on a CFMOTO ZForce 950
How to Install Heavy-Duty Nerf Bars on a Can-Am Defender
How to Install a Flip Windshield on a Can-Am Commander XT 1000