Created: August 9, 2018
Hey everybody, Braden here at SuperATV. Today I am going to be showing you how super easy it is to install a flip down windshield on this Can-Am Commander. Let’s get started.
When you receive your windshield from SuperATV, this is what you are going to get in the box. You’re going to get your preassembled windshield, your upper seal, your bulb seal, gasket, your heavy duty Velcro strips, and of course in the packing slip, you get detailed color instructions. Let’s get started.
Be sure to peel off the protective film on both sides. Alright, so now we are going to run our bulb seal on our lower windshield and in the box you are going to receive two different bulb seals. We are going to use the shorter bulb seal on this lower portion of the windshield here.
Alright, so now we are going to install our gasket on our lower windshield here. Now you are going to grab your other roll of bulb seal and start on the side of the lower windshield. Run it all the way up to here and we’ll go ahead and make a cut.
Alright, now we are going to start at the bottom of the upper windshield and run this bulb seal all the way up to the top. One thing to keep in mind is this portion of the bulb seal always needs to be on the bracket side. Alright, so we are going to run it all the way up to here where the windshield starts to bend and then we will make our cut. Now do the same exact thing on the opposite side.
Now we are going to flip the windshield over and install the upper seal. Alright, take your upper seal and your upper windshield and run it right along the lip. Alright, now that we have all our seals on our windshield let’s take it on over to the machine and show you how easy it is to get it installed.
Alright, now let’s take our windshield and put it in place before we secure it down to the machine. Alright, so whenever you go to install your lower strap on your lower windshield, you’re going to ensure that the sticky portion of the heavy duty Velcro strap is to the inside and you are going to go through just like this and then you’ll see on your strap you have two eyes here where the strap actually goes through. You just want to ensure that you only go through one, leaving this one on the outside so that way whenever you want to flip your windshield down you can secure your other Velcro strap to it. Let’s go ahead and tighten this up.
Once you repeat the same step on the opposite side here, let’s take our strap and put it on the upper windshield. We will do the same thing on this side. Alright, now that the windshield is installed, this is what you do. Start by removing your upper straps. Now that the windshield is folded down, what you are going to do is take your strap and tighten it down. That’s all there is to install this flip-down windshield on this Can-Am Commander.
For more information on this windshield or more of our awesome products, please be sure to visit us online at superatv.com or call in at (855)-743-3427. Thanks for watching and have a great day.