Off-road Atlas LogoOff-road Atlas Logo
  • Behind The Wheel
  • How-To
  • News
  • Stories

How to Install a Flip-Down Windshield on a Kawasaki MULE PRO-FXT

By Tyler Mingione | How-To on August 15, 2018
2M READ
Share
1

Length: 4:57
Created: August 15, 2018

Transcript

[0:00] Hey everybody, Braden here at SuperATV. Today I am going to be showing you how super easy it is to install our Flip-Down Windshield on a Kawasaki MULE PRO-FXT. Let’s come over here and I’ll show you what’s in the box.

First, remove the partially assembled windshield, your heavy-duty Velcro straps, ninety degree bulb seal, bulb seal, gasket, U-seal, and full-color instructions from the box. Alright, let’s begin.

Install the Gasket

[0:30] Be sure to peel off the protective film on both sides. Now, we are going to install our gasket on the lower portion of our windshield. Start on the lower portion of the windshield and run it all the way around to the opposite side. Make sure you’re really pushing it on there and that it’s fully seated.

Install the Bulb Seals

Next, we are going to take our ninety degree bulb seal. Run a small portion on the lower windshield. Then, do the exact same thing on the other side.

Now we have the windshield flipped around. We’re going to take the bulb seal and run it on the upper portion of the windshield. Then, do the exact same thing on the opposite side.

After that, take your U-Seal and install it on the upper portion of the windshield.

Place the Windshield on the Machine

[2:13] Next, you are going to grab a buddy and place the windshield on the machine. You want to ensure that the hook is raised out like that.

Now the windshield is installed.

Folding Down the Windshield

[2:45]When you want to fold down the windshield, this is what you will do. First, start by taking your upper straps off and putting them in a secure location. We’re just going to throw them in the glove box. After that, remove this strap as well. We’ll want to keep this one handy.

If your machine isn’t equipped with a factory roof, just flip it down. Since ours is, we have to loosen this lower strap on either side just enough to slide it down the cage. We will do the exact same thing on this other side. Now we will just flip it down and then take our other strap, run it through here, and tighten it down.

That’s all it takes to install the SuperATV Flip-Down Windshield on a Kawasaki MULE PRO-FXT. For more information on this windshield or more of our awesome products, please visit us at superatv.com or call (855) 743-3427. Thanks for watching and have a great day.

RELATED CONTENT: flip-down windshields6 installation262 Kawasaki Mule6 UTV windshields58
Share
1

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *



Related

  • What Customers Are Saying About Rhino 2.0 Axles

    Behind The Wheel | 4 MIN READ
  • How to Install a Plug & Play Turn Signal Kit on a Can-Am Defender

    How-To | 11 MIN READ
  • How to Install a Gen 3 GDP Portal Gear Lift on a Polaris RZR XP 1000

    How-To | 8 MIN READ
  • How to Install High Clearance Forward Offset A-Arms on the Polaris RZR PRO XP

    How-To | 9 MIN READ
  • How to Install a Rev1 Clutch Kit on a Polaris RZR XP Turbo S

    How-To | 10 MIN READ
  • How to Install High Clearance Forward Offset A-Arms on a Honda Pioneer 1000-5

    How-To | 6 MIN READ
  • How to Install a Rhino Driveline Prop Shaft on a Polaris RZR 1000

    How-To | 7 MIN READ
  • How to Install a 6" Lift Kit on a Honda Pioneer 1000

    How-To | 12 MIN READ
  • How to Install a Rear Windshield on a Textron Wildcat XX

    How-To | 3 MIN READ
Copyright © 2021 SuperATV. All rights reserved.
SHOP NOW