Length: 5:08
Created: July 26, 2018
Hey everybody, Braden here at SuperATV. Today, I’m going to be showing you how super easy it is to install one of SuperATV’s flip down windshields on the 2018 Polaris RZR Turbo S. Let’s go over here and we will see what’s inside the box.
When you get your windshield from SuperATV, this is what you are going to get inside the box. You are going to get your preassembled windshield, your upper seal, your bulb seal, gasket, your tie down brackets, and your heavy duty tie down straps, and of course in the packing slip you get detailed color instructions. Let’s get started.
Be sure to peel off the protective film on both sides, then throw away the protective film. Now, we are going to run the upper seal and cut off any excess. Now we are going to run our bulb seal and cut off any excess. Whenever you get to this point you’re going to want to ensure that you cut this in between the upper and lower windshield.
Now you are going to want to take your bulb seal and start at the top of the lower windshield. Go all the way along the bottom and ensuring that whenever you come to the contours, the bends here, that you are really pushing the seal up in there. And then, once we get to this portion here, we are going to make another cut. Run it up just as you did on the opposite side. Once you get to this point right here, go ahead and make your cut and you got your bulb seal on.
On the lower windshield is where we are going to install our gasket all the way down through here. First you are going to peel off the backside of the gasket. Ensure that you get it nice and straight.
Now let’s step on over to the machine and install our tie down brackets. All right, now get a t40 Torx and remove these screws on your machine. All right so now we are going to take our bracket and the spacer included in the kit and install it on the machine with the factory screw. Now we are going to do the exact same steps on the other side.
Next up, you are going to take your windshield and put it on the machine. Make sure that everything is lined up and in place. Now we are going to secure the windshield to the machine using our heavy duty straps.
Now that it is installed and you want to fold it down, first thing you are going to do is remove your top straps. Grab your windshield, flip it down, take your strap and run it through your tie down bracket, through the upper portion of your windshield, and then tighten it down. Now with the windshield flipped down, you got that nice cool breeze blowing through your Razor Turbo S.
For more information on our flip-down windshield, please be sure to visit us at superatv.com or call in at (855)-743-3427. Thanks for watching and have a great day.