Created: January 17, 2019
First thing we are going to do is install the bulb seal starting at this location here, following the contours of the windshield, all the way to here. When installing the bulb seal, make sure that the bulb portion of the seal is facing towards the inside of the machine and away from the raised portion. Peel back the protective film enough to install the bulb seal. Once you get to this part here, cut off the excess.
Now let’s place the windshield on the machine to ease the rest of the installation. Let’s attach it to the cage using our provided hardware and shrink up the rubber portion of the sealed washer, spacing the windshield.
Now we are going to install the cage cover. And now we are going to peel off the protective film.
So that is how easy it is to install SuperATV’s Full Windshield on this Can-Am Maverick Trail. For more information on this windshield or any other SuperATV products give us a call at (855) 743-3427, or check us out online at SuperATV.com. Thanks for watching and have a great day.
How to Install Rhino Driveline Prop Shaft on Can-Am Maverick X3
How to Install a Rhino Driveline Prop Shaft on a Polaris RZR 1000
How to Install a Plug & Play Turn Signal Kit on a Can-Am Defender
How to Install a 6" Lift Kit on a Honda Pioneer 1000
How to Install a Gen 3 GDP Portal Gear Lift on a Polaris RZR XP 1000
How to Install High Clearance Forward Offset A-Arms on the Polaris RZR PRO XP