Off-road Atlas LogoOff-road Atlas Logo
  • Behind The Wheel
  • How-To
  • News
  • Stories

How to a Install Full Windshield on a Polaris RZR XP 1000

By Tyler Mingione | How-To on April 18, 2018
<1M READ
Share
2

Length: 2:45
Created: April 18, 2018

Transcript

[0:00] What’s up guys? Matt here at SuperATV. Today I want to show you how quick and easy it is to install and remove one of our Full Windshields on this Polaris RZR XP 1000.

Place the Windshield on Your RZR

Once you put it on the machine, now you have time to go around and strap down all four clamps. Our windshields use high-quality Velcro straps that stick even when packed with dirt and debris. So it’s that easy to put on and this easy to take off.

[1:11] So there you have it! Now let’s see what it takes to put together right out of the box.

After opening the box, lay out your windshield, these four clamps, and your lower windshield seal. Start by removing the protective shipping wrap.

Install the Bulb Seal

[1:33] It’s now time to install the seal to the lower part of the windshield. As you can see, the lower part of this full windshield is shaped to match the contours of your hood for an excellent seal.

Grab your seal and start on one end. Pressing firmly, you’re gonna put that seal all the way up to the bottom of the windshield. Follow it the whole length of the windshield, making sure it’s seated.

As you can see over here, there’s some excess. Trim that off.

Secure the Full Windshield to Your Machine

[2:16] Then grab your four clamps and press those into the front of your windshield. Now this windshield is ready to go on the machine. It’s that easy!

For more information on these windshields or other great products, check us out at SuperATV.com or feel free to give us a call. Thanks for watching and have a great day!

RELATED CONTENT: full windshields9 installation263 Polaris RZR 100030 UTV windshields59
Share
2

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *



Related

  • How to Install a Rhino Driveline Prop Shaft on a Polaris RZR 1000

    How-To | 7 MIN READ
  • How to Install a Gen 3 GDP Portal Gear Lift on a Polaris RZR XP 1000

    How-To | 8 MIN READ
  • How to Install a Rev1 Clutch Kit on a Polaris RZR XP Turbo S

    How-To | 10 MIN READ
  • How to Install a Plug & Play Turn Signal Kit on a Can-Am Defender

    How-To | 11 MIN READ
  • How to Install a 6" Lift Kit on a Honda Pioneer 1000

    How-To | 12 MIN READ
  • How to Install High Clearance Forward Offset A-Arms on a Honda Pioneer 1000-5

    How-To | 6 MIN READ
  • How to Install High Clearance Forward Offset A-Arms on the Polaris RZR PRO XP

    How-To | 9 MIN READ
  • How to Install Winch & Winch Mount on Polaris RZR 1000

    How-To | 10 MIN READ
  • How to Install a Plug & Play Turn Signal Kit on a Polaris General

    How-To | 8 MIN READ
Copyright © 2021 SuperATV. All rights reserved.
SHOP NOW