Created: November 28, 2018
Hey everybody, Braden here at SuperATV. Today we are going to be installing a rear windshield on this Polaris RZR XP 1000. Let’s get started.
First thing that we are gonna do is take our straight bulb seal and install it to the lower portion of our windshield, starting here in this corner and following all the contours all the way to this corner here. For ease of installation, you’re going to want to make a cut here. Be sure to only cut the ball portion of the seal. Do the exact same thing on the opposite side once we’ve ran our bulb seal all the way up to this corner here. We’re going to go ahead and cut off the excess.
Next we are going to install the ninety-degree bulb seal starting on the windshield here, following all the contours to this location here. When installing the ninety-degree bulb seal you’re going to make sure that the bulb portion of it is facing towards the rear of the machine. Then really make sure that you’re getting it fully seated on all the contours. Once the bulb seal is fully seated we’re going to go ahead and cut off any excess.
Now we are going to install the flap seals into these two holes. Now we are going to install our clamps, making sure that the plastic part is facing towards the front of the machine. Now repeat the same process on the other side.
Our windshield is prepped, but before we can get it on the machine, we are going to come over here. Remove our seat belts and seats, and this will apply for the two seater and the four seater.
The last thing that we are going to do before installing the windshield on the machine is apply the gasket to this portion of the cage. Now, cut off any excess.
Alright, all the prep work is done, now we can get the windshield installed on the machine. Once the windshield is installed and fit and snug, we can go ahead and take our heavy-duty Velcro straps and run them through our clamps.
Once the rear windshield is installed, we can go ahead and reinstall the seat belts and seats. If you are using a harness, this is the location where the harnesses are going to go through.
So that’s how easy it is to install SuperATV’s Rear Windshield on this Polaris RZR XP 1000. For more information on this rear windshield or any of SuperATV’s great products, give us a call at (855) 743-3427 or check us out online at SuperATV.com. Thanks for watching and have a great day.