Off-road Atlas LogoOff-road Atlas Logo
  • Behind The Wheel
  • How-To
  • News
  • Stories

How to Install Scratch-Resistant Full Windshield on Polaris RZR Trail S 900

By Joe Crisan | How-To on March 29, 2021
2M READ
Share
0

Length: 2:47
Created: March 29, 2021

Transcript

What’s up, guys? Are you looking for a tinted full windshield for your Polaris RZR Trail S? SuperATV has you covered, and today we’re going to show you how to install one. Let’s get right to it.

What’s Included

[00:20] As always, the first thing you want to do is remove everything out of the box. We have everything laid out here. As you can see, we already removed the protective film off of the windshield.

Take the RZR windshield with the protective film on it, and slide it on the machine to ensure that it fits.

Getting the Windshield Ready

[00:40] We have the bulb seal laid out. We have the windshield laying face down with the lip coming up. The lip is going to be going towards the inside of the machine.

We wanna make sure we have the bulb portion facing toward the inside of the machine. It’s going to lay on the cage and on the hood really nicely.

Applying the Bulb Seal

[01:02] I like to start the bulb seal in the center. We’re just gonna go all the way around this full windshield and come right back to this point. And then cut off the excess. Now we have the bulb seal all installed.

We have the windshield prepped and ready to go.

Fitting the Windshield

[01:17] So now we’re going to slide it right up the cage. It will be a snug fit, so you have to apply some pressure to get it into position. Work side to side and pull straight up so we have good contact.

Secure It

[01:42] Then we’re going to run the straps through the RZR windshield, and then run it back through here. And once we get a little bit coming through, I like to feed it through the hole as we are pushing the strap through the notch in the windshield.

Apply as much pressure as you can to make sure you’re gonna get a good strap. Then you’ll just repeat the same steps for the rest of the straps.

So there you have it guys. That’s how super quick and easy it is to install SuperATV’s Polaris RZR Trail S 900 Full Windshield.

For more information on this windshield or any of SuperATV’s great products, feel free to give us a call or check us out online. Thanks for watching, and we’ll catch you next time.

RELATED CONTENT: full windshields9 installation262 UTV windshields58
Share
0

2 Comments

  1. Avatar for Paul Paul says:
    September 13, 2021 at 8:29 am

    Looking for instructions to install flip windshield on Honda Pioneer 520

    Reply
    • Avatar for Tyler Lichlyter Tyler Lichlyter says:
      September 13, 2021 at 9:10 am

      Hey Paul! We provide instructions on all of our product pages, so you can locate this on our Honda Pioneer 520 Flip Windshield page: https://www.superatv.com/honda-pioneer-520-scratch-resistant-flip-windshield This can be found on the tab labeled Installation Instructions next to our Warranty & Returns section. Hopefully this helps!

      Reply

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *



Related

  • How to Install a Clutch Kit on a Polaris RZR Trail S 1000

    How-To | 8 MIN READ
  • How to Install Half Windshield on Polaris RZR Trail 900/S 900/S 1000

    How-To | 2 MIN READ
  • What to Look for in a UTV Roof—The Ultimate Guide

    Behind The Wheel | 5 MIN READ
  • How to Install a Glass Windshield on a Polaris RZR Turbo S

    How-To | 3 MIN READ
  • How to Install a Rack and Pinion on a Polaris RZR Trail S 900/RZR S 1000

    How-To | 6 MIN READ
  • How to Install a Full Windshield on a Can-Am Commander XT

    How-To | <1 MIN READ
  • How to Install Fender Flares on a Polaris RZR Trail S 900/RZR Trail S 1000

    How-To | 3 MIN READ
  • How to Install Tie Rods on a Polaris RZR Trail S 1000

    How-To | 4 MIN READ
  • How to Install Inner Fender Guards on a Polaris RZR XP 1000/XP Turbo

    How-To | 3 MIN READ
Copyright © 2021 SuperATV. All rights reserved.
SHOP NOW