Off-road Atlas LogoOff-road Atlas Logo
  • Behind The Wheel
  • How-To
  • News
  • Stories

How to Install Seat Risers on a Polaris RZR PRO XP

By Tyler Mingione | How-To on July 23, 2020
2M READ
Share
0

Length: 4:55
Created: July 23, 2020

Transcript

What’s up guys? Are you looking for a little bit more visibility our of your PRO XP? Well today, We’re going to be showing you how to install SuperATV Seat Risers. So let’s get right to it.

First, move the harnesses out of the way. Reach down under the front portion of the seat and lift up the latch to remove the seat. Flip it forward and pull it back and the seat will come off. Set it aside. Next, remove all eight of the nuts securing the base to the frame. Remove the saddles from the rear studs. Grab the base, pick it straight up, and set it aside.

Installing the Seat Risers

[01:28] Now we’ll grab our risers. We’re going to have for risers. Take each of them and place them on the studs. Remove the lower plastic portion of the saddle here as well. That way the risers sit down flat.

Grab all the nuts and get them all started onto each of the OEM studs that are coming through the frame. Once they’re all started, fully tighten all of them.

Reassembling Your Seat

[02:52] Now that the risers are installed, grab the base and lay it right onto where the threaded holes go. What I like to do is get the front started first like this. Don’t tighten anything yet. With the front started, grab the plastic saddles that we removed from the lower portion. Slide those into place just like that. Take the metal saddles and drop them in. Then get the hardware started. Now go through and fully tighten the hardware.

Then grab the seat, get it reinstalled just like that, and get the harnesses flipped back over. Now that you have your seat risers installed, you just gained a ton more visibility.

And that’s how super quick and easy it is to install SuperATV’s seat risers on this Polaris RZR PRO XP. For more information on these seat risers or any of SuperATV’s great products, feel free to give us a call at 855-743-3427, or check us out online at SuperATV.com.

Thanks for watching, and we’ll catch you next time.

RELATED CONTENT: installation262 Polaris RZR PRO XP26
Share
0

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *



Related

  • How to Install a Rhino Driveline Prop Shaft on a Polaris RZR 1000

    How-To | 7 MIN READ
  • How to Install High Clearance Forward Offset A-Arms on a Honda Pioneer 1000-5

    How-To | 6 MIN READ
  • How to Install High Clearance Forward Offset A-Arms on the Polaris RZR PRO XP

    How-To | 9 MIN READ
  • How to Install a Gen 3 GDP Portal Gear Lift on a Polaris RZR XP 1000

    How-To | 8 MIN READ
  • How to Install a Plug & Play Turn Signal Kit on a Can-Am Defender

    How-To | 11 MIN READ
  • How to Install a Rev1 Clutch Kit on a Polaris RZR XP Turbo S

    How-To | 10 MIN READ
  • How to Install Winch & Winch Mount on Polaris RZR 1000

    How-To | 10 MIN READ
  • How to Install a 6" Lift Kit on a Honda Pioneer 1000

    How-To | 12 MIN READ
  • How to Install a Plug & Play Turn Signal Kit on a Polaris General

    How-To | 8 MIN READ
Copyright © 2021 SuperATV. All rights reserved.
SHOP NOW