Length: 4:22
Created: June 10, 2022
What’s up, guys? Today we’re going to show you how easy it is to install SuperATV’s Bed Enclosure on a Polaris RZR Pro R. Let’s get right to it.
The first thing you’ll do is remove the two fasteners. If you don’t have a cargo box, they will be T-40s. If you have a SuperATV cargo box, they will be 10mm.
Remove the hardware and set it aside. Then move to the bed. On the side of the bed rail there is a T-40. There will be one on the opposite side as well. Remove them both and set them aside.
Now it’s time to install the bed enclosure.
If you do not have a SuperATV cargo box, you’ll reuse the factory hardware. If you do have a SuperATV cargo box, you will use the hardware that is provided in the kit.
Align the enclosure with the holes where you previously removed the hardware. Place the hardware back in the holes and tighten them, but not all the way. You want it to be secure enough to not move, but you should still have some wiggle room to adjust the other side.
Next, take the bracket and the provided bolts in the kit. They should be the only bolts in the kit. Loosely install them into the threaded bracket.
Take the shim and put it on the back side of the bracket. Then slide the T-40 Torx through the bracket, through the shim, and into the factory hole. Finger-tighten that bolt, then repeat the same steps for the opposite side.
Once you have everything installed and all the hardware finger-tight, you can tighten all the hardware fully. Then you’re done installing SuperATV’s Bed Enclosure on this Polaris RZR Pro R! Don’t forget to check out the rest of our great RZR Pro R upgrades. See you on the trail!
