Off-road Atlas LogoOff-road Atlas Logo
  • Behind The Wheel
  • How-To
  • News
  • Stories

How to Install a Bed Rack Delta for the Polaris Xpedition XP

By Chloe Preocanin | How-To on December 19, 2024
2M READ
Share
0

Date: Dec 19, 2024
Time: 3:00

[0:00] Introduction

Are you looking for additional storage without compromising bed space? SuperATV has the answer with the Bed Rack Delta for the Polaris Xpedition. In this video, Braden Adams walks you through the full installation process, making it simple to upgrade your ride.

[0:32] Welcome and Tools Overview

Welcome back to Grease the Wheels! I’m Braden Adams, and today we’re in my garage installing SuperATV’s Bed Rack Delta on the Polaris Xpedition XP. Before we get started, here’s a look at the tools you’ll need to complete the install efficiently.

[0:53] Accessing the Bed Channels

Begin by opening the bed and dropping the tailgate. Locate the rubber grommet in the rear corner of the bed and remove it to access the mounting channel. Grab the threaded bracket from the kit and slide it into the channel. You’ll want to position it loosely for now so it can be adjusted when the mount is in place. Repeat this step for the opposite side of the bed.

[1:20] Installing the Mounts and Rack

Next, grab your mount brackets and the included short hardware. Place each mount on top of the bed channel, aligning the notches with the bracket. Thread the bolts down into the channel’s bracket using your hand to start. You can position the mounts anywhere along the channel—we recommend mounting toward the rear of the bed for easy reach.

Once both mounts are loosely secured, lift the bed rack into place and rest it on the mounts. Align the slotted channels in the rack with the square mounting holes in the brackets. Use the included carriage bolts and insert them from the top down. Thread Nylock nuts onto the bolts from underneath. Don’t fully tighten yet—this allows for minor adjustments to ensure the rack sits evenly.

[2:27] Final Steps

With the bed rack in position and even on both sides, go ahead and fully tighten all the hardware. Start with the mounts to lock their position, then finish by securing the carriage bolts holding the rack. Double-check for equal spacing and snug fit.

[2:37] Outro

And that’s it! Installing SuperATV’s Bed Rack Delta on the Polaris Xpedition XP is a quick and effective way to boost your machine’s storage without sacrificing bed space. Be sure to check the description below to pick yours up today. While you’re there, drop a like, comment, and subscribe to Grease the Wheels for more helpful install videos and UTV upgrades.

RELATED CONTENT: Bed Rack Delta2 Polaris Xpedition XP1
Share
0

Leave a Reply Cancel Reply

Your email address will not be published. Required fields are marked *

Copyright © 2026 SuperATV. All rights reserved.
SHOP NOW