Can-Am Defender HD7 High-Clearance 2" Forward Offset A-Arms

Dominate the Trail
Your Defender is a high-quality workhorse, but can it keep up on the trail? Nobody will doubt your ability to take on even the biggest obstacles with SuperATV’s Can-Am Defender HD7 High-Clearance 2" Forward Offset A-Arms. Their custom bend design gives you a higher clearance, so you can run up to 32” tires without a lift! The heavy-duty tubing is 25% larger than stock, so it’s visibly bigger and tougher than the average UTV A-arm. Dominate the trail while turning heads with these badass A-arms.

More Clearance for More Fun
Our A-arms add a full 2 inches of forward offset. That means room for bigger tires without needing a lift (these A-arms look good on lifted rigs too, by the way). The precision-engineered bend squeezes in an extra 1.5” of ground clearance. Put it all together and these A-arms will have your Defender sailing over even the roughest terrain. Whether you’re on the job or on the trail, our A-arms make sure your rig is ready for anything.

Bigger = Better
We use heavy-duty 1.25” tubing that’s 25% larger than stock. Bigger obviously = better in this situation. Plus, we powder coat every inch that’s exposed to the elements for incredible rust and corrosion resistance. Mega size and mega-strength make for heavy-duty, good-looking A-arms.

We’re serious about their strength. That’s why we back them with a lifetime warranty so you have the confidence to put the pedal down.

Adjustable Camber
This kit uses adjustable pivot blocks so you can set your camber perfectly if you add a lift or extra weight. Don’t want to mess with camber? No problem! They’re set to stock specs out of the box so you can install and go.

Let SuperATV Do the Work—Preassembly Available!
Want to spend more time on the trails and less time in the garage? Purchase a set of SuperATV ball joints with your A-arms and we’ll install them for you for free! We save you money and time so you can get back to doing what you love.

NOTE: You must re-use your stock ball joints if you don’t select a pre-installed ball joint at checkout.

Heavy-Duty Ball Joints
Our heavy-duty ball joints are designed with ultimate performance and convenience in mind. Whether you’re doing flips or chasing hills, our proprietary blend of hardened 4340 VAR steel and zinc plating means this ball joint can take it. Our heavy-duty ball joints also come with easily-accessible grease zerks and an adjustable design. Extensive lab and field testing shows that our heavy-duty ball joints can withstand double the pressure of an OEM ball joint!

Super-Duty 300M Ball Joints
We took the strongest ball joint material on the market—300M grade steel—and combined it with our superior design engineering to make the strongest ball joint on the market. It comes with an easily-accessible grease zerk and an adjustable steel-on-steel design, making it easy to keep your ball joints maintained and flexible. At 2.25x stronger than stock, you won’t find a better ball joint.

Keller Ball Joints
Keller Ball Joints have a two-piece design that eliminates the need for a snap ring. They thread directly onto your A-arms like a nut and bolt, making them nearly impossible to pull out. They’re built with a tough chromoly steel stud and an advanced tool-steel body, so they’re ideal for larger machines, bigger tires, and heavier rides. Plus, they’re greaseable and rebuildable, so you can keep them running smoothly for the long haul.