How Much Lift Do You Need?
Who says you can't have high performance and lift, too? We engineer our Gear Driven Performance (GDP) portal gear lifts to take back your torque. Get more clearance and transfer power directly to those monster tires for a ride like you’ve never experienced. SuperATV portal gear lifts provide a 30%-45% gear reduction without removing or tearing apart your transmission, and the added lift will give you room for those big tires. We were the first to perfect this technology, and we continue to push the limits of horsepower and performance.
Portal Gear Lift Parts and Accessories
We have everything you need to service your portal gear lift. Check out our selection of recessed nut kits, brake rotor kits, conversion kits, and seal and bearing rebuild kits.
Our NEW 8” Portal Gear Lifts give you a major lift and gear reduction in one package.
-
Internally Sealed Drive Gear
O-Ring Gasket
-
1.5” Forward & Rear Offset
-
45% Gear Reduction (1.82:1 Ratio)
Now available for these Polaris models:
-
Polaris Ranger XP 900 & Ranger Crew XP 900
Polaris Ranger Fullsize XP 570
-
Polaris Ranger XP 1000 & Ranger Crew 1000
-
Polaris RZR XP 1000 & XP 4 1000
-
Polaris RZR XP Turbo
Do You Need a Portal Gear Lift? YES.
Here is why you need a set of portals.
You need ground clearance.
A machine at stock height is going to have trouble clearing obstacles no matter how much power it has. Hitting a hazard hard will only get you so far. Hard riding on a low frame can result in damage to important parts of your UTVs driveline and frame. Our portal gear lifts will increase your ride height by up to 8” but the bonus is they add more room for bigger tires. When you pair a lift with big tires there isn’t much that can stop you.
You need to turn those big tires.
As tire size increases, so does weight. Also, your factory UTV is geared for a certain size tire. When you change from stock to a bigger tire, you need to account for the tire circumference and tire weight or else you will lose performance. That is where our GDP Portals shine. Our portals use a gear reduction to help deliver your engine’s torque back to the wheels where it’s needed. The magical science of gear reduction helps us make your machine a killer.
How Much Do You Know About Portals?
Most people have an opinion about portals - they may even think they know a lot about them. But SuperATV’s GDP Portal Lifts are different. We have spent a lot of time working to perfect our portal gear lifts. Our engineers and design staff have tested our products in the lab and in the field, and we know we have the best portal gear lifts on the market. What you don't know might surprise you.
Installation is Easy
You don’t need to be a mechanic to install our portals. It doesn't matter if this is your first UTV or your tenth - you can lift your ride with GDP Portals. We include all the instructions you need and are just a phone call away if you have any issues - but you won't. Just get a set of portals, get to work, and then crack open a cold one and admire your work. Make sure to send us a pic of your baby for our bulletin board.
-
Easy to Install and Easy to Adjust
Customize your machine to match your riding needs
Each wheel hub includes 4 bolt patterns 4/156, 4/137, 4/115, 4/110
-
Ability to utilize different wheels on the same hub
-
Stainless steel, braided brake lines included in each kit
Reclaim Your Lost Torque
If you are running big tires, you need to gear down. Our GDP Portals provide the torque you need and the speed you want. High clearance from bigger tires seems great until you get left in the dust by your buddies, but that won't happen with our portals. They offer torque-producing gear reduction of 30% for the 4" lift and 45% for the 6" and 8” lifts. Pair this with the right tires, and you will be cruising at factory speed.
-
Put less stress on your driveline
-
Increases torque, but keeps your axle angles performance-ready
-
No need to tear apart your transmission
A Quiet Ride
Our portals are NOT noisy. SuperATV GDP Portals are quiet because we don't hob our gears. We precision grind all our gears to fit so snugly that you couldn't fit a fingernail between them. That means less vibration and friction. Each precision ground gear makes for quieter ride with "no clicking." which makes them different than other crappy portals out there.
-
Precision-Ground Gears: Drive Gear, Idler Gear and Driven Gear
Precision-ground chromium titanium alloy gears for industry best performance
Eliminates friction for reduced heat and noise
SEE OUR PORTAL GEAR LIFTS IN ACTION!