Can-Am Maverick 8" Portal Gear Lift

SKU
PGH8-7-MAV-PORTAL
$3,899.95
 

Details

Gear Down and Go Big
SuperATV’s GDP 8” Portal Gear Lift for the Can-Am Maverick is geared down so you can go big. It gives you a lift and a 45% gear reduction in one box. Get the clearance to run bigger tires and the torque you need to turn them. The lift and gear reduction are in the hub, so they maintain suspension geometry and reduce drivetrain stress. Big clearance, big torque, and big tires — with GDP you can unleash the beast.

Perfect for Mud
With 8” portals and a 45% gear reduction, you get clearance for huge tires and a massive boost in torque. With all that torque, big tires won’t slow you down, and with all that lift, you’ll roll through bounty holes like they’re mud puddles. Our 8” portals are made for mud.

Perfect for Rocks
Get tons of torque to crawl over any rock or boulder you can find by installing an 8” GDP portal box with a 45% gear reduction. More power means you can take on bigger boulders and steeper shelves. With all that clearance, you can install huge tires and never get high-centered. Clearance and power open a world of rock crawling possibilities.

Learn more about how tire size and gear reduction can unleash your machine’s potential.

Better Gears
Our gears are precision ground and made with 9310 billet steel alloy. They’re designed to take all the torque and abuse you can give them without chipping teeth or blowing up. Our precise design and manufacturing mean they’re cool and quiet even when you’re hammering down the throttle in the mud hole.

Billet Housings
Choose billet or cast aluminum housings to finish your portals. Our billet housings are CNC-machined right here in Madison, Indiana and give you increased strength and consistency over cast. Plus, there’s nothing quite like spraying the mud off your pristine billet housings.

Reinforce Your Frame with a Frame Stiffener
We highly recommend running a SuperATV Frame Stiffener with your 8" Portal Gear Lift. A frame stiffener reinforces your frame enough to let you ride your 8" portals with monster tires and no worries.

Can-Am Maverick Portal Gear Reduction Recommendations
Tire Size Required Suspension Setup with 8" Portals
40" Stock
43" 3" Lift Kit
46" 6" Lift Kit
Gear reductions listed are general guidelines to maximize torque and maintain factory top speed. A larger than recommended gear reduction will result in more torque and lower top speed. Give us a call for more information.

Fitment

SuperATV Part Number 7-32-101
Will Fit:

  • Can-Am Maverick Standard : 2013-2015
  • Can-Am Maverick X RS : 2013-2015
  • Can-Am Maverick X RS-DPS : 2014-2015
  • Can-Am Maverick X XC : 2014-2015

SuperATV Part Number 7-32-103
Will Fit:

  • Can-Am Maverick Standard : 2016+
  • Can-Am Maverick DPS : 2016+
  • Can-Am Maverick XC : 2016+
  • Can-Am Maverick X XC : 2016+

SuperATV Part Number 7-32-104
Will Fit:

  • Can-Am Maverick Max Standard : 2014-2015
  • Can-Am Maverick Max XRS : 2014-2015
  • Can-Am Maverick Max XRS-DPS : 2014-2015

SuperATV Part Number 7-32-102
Will Fit:

  • Can-Am Maverick X MR : 2014-2015

SuperATV Part Number 7-51-101
Will Fit:

  • Can-Am Maverick Turbo : 2016-2017
  • Can-Am Maverick X DS : 2015-2016
  • Can-Am Maverick X DS Turbo : 2015-2016
  • Can-Am Maverick X MR : 2016+
  • Can-Am Maverick X RS Turbo : 2016

SuperATV Part Number 7-51-102
Will Fit:

  • Can-Am Maverick MAX Turbo : 2016-2017
  • Can-Am Maverick MAX X DS : 2015-2017
  • Can-Am Maverick MAX X DS Turbo : 2015-2017
  • Can-Am Maverick MAX DPS : 2016+
  • Can-Am Maverick MAX X RS Turbo : 2016-2017
  • Can-Am Maverick MAX X MR : 2017+

Features

  • 1.5” Forward offset
  • 9310 billet steel alloy precision ground gears are cool and quiet
  • Available with billet or cast aluminum housing
  • 1.5 in. diameter 4340 hardened steel drive shaft
  • No leak bearings and seals
  • Universal hub fits all major bolt patterns
  • Comes complete with all hardware, backing plates, brakes lines, and instructions
Wheel Requirements:
  • 22” or larger wheel required
  • Wheels cannot exceed 5” backspacing


Warranty
Limited Lifetime Warranty

When filling gear box use only 80W-90 gear oil. Using grease will cause failure of gears and bearings. Using grease will void your warranty.

SuperATV extends the following limited lifetime warranty. This limited warranty extends only to the original purchaser. SuperATV warrants this product and its parts (excluding bearings, seals, & gaskets). Warranty is limited to material and / or workmanship defect at the time of shipment from the factory, and in no event shall seller have any liability for consequential damages of any kind resulting from a breach of this warranty. This warranty will be void on all products that show evidence of misapplication, improper installation, abuse, lack of proper maintenance, negligence, or alteration from original design. This warranty is in lieu of any other warranties, either expressed or implied, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTIBILTY OR FITNESS FOR ANY PARTICULAR PURPOSE.

Procedures for obtaining warranty service:

Should you have any problems with your Gear Driven Performance product, please call SuperATV Customer Service at 855-743-3427. Please have a copy of your original purchase receipt available, with dealer name (if applicable), date of purchase, and invoice number when calling for technical help. Most often, installation, or break in procedural issues (See break in procedure information, located in the instructions) can be handled quickly by speaking with one of our customer service representatives.

If it is determined that repairs are required to your Gear Driven Performance portal, you MUST acquire an RGA number from our customer service team. RGA's and repair services are ONLY rendered by SuperATV. Any shipping costs incurred after 30 days (starting from the original purchase date) on any Portal returned for repair is the customer's responsibility. ALL Portals must be returned in the original box, with the original packaging, or a similarly well protected box. ALL portals must have the RGA number clearly written on the outside of the package. NO COD packages will be accepted, and no package will be accepted without an RGA number written on the outside of the box. Shipping information, including address and method, will be given to you by our customer service team and/or listed on our website when you create your RGA.

Upon arrival of your warranty parts we will have them inspected by our technicians to determine if the damage was a manufacturing defect or rider/installation error. The inspection usually takes place 1-2 days after the package arrives. SuperATV will then call you with the results of the inspection. Depending on the outcome of the inspection, you may be required to pay a replacement fee for the broken parts (prices may vary depending on parts that need to be replaced). We do our best to get your issues corrected as soon as possible so you can get back out on the trails. We also match shipping labels for our customers. If you ship the warranty parts to us with an overnight label, we will return the favor and send you the replacements parts on an overnight shipment at no charge.

Replacement bearings, seals and gaskets can be found at www.SuperATV.com.

Thank you for your business!