Can-Am Maverick X3 4" Portal Gear Lift

SKU
PGH-7-72-PORTAL-G3
$2,899.95
 

Details

Gen 3 Portals are Geared for All
SuperATV’s GDP 4” Portal Gear Lift for the Can-Am Maverick X3 is Geared for All. Choose from 15% or 30% gear reductions and cast or billet aluminum housings so you can optimize for the riding you do most.

Perfect for Mud
If you move up to a 30% gear reduction, you’ll be ready to take on bigger, sloppier mud holes. A 30% gear reduction with 4” portals gives you a big boost in torque so you can run huge tires through thicker slop and get all your UTV’s power to the ground. When you’re done with the mud, a 30% gear reduction can get you through trails and rocks just as easily.

Perfect for Rocks
Put 4” portals and a 30% gear reduction on your machine and get the torque you need crawl over rocks like they’re not even there. You’ll have the clearance to get over anything without scratching up your skid plate, and you’ll have room to run bigger tires. These portals are built for boulders.

Perfect for Dunes
Put 4” portals and a 15% gear reduction on your machine and see how fast you can go. You’ll fly up dunes like they’re flat ground and keep your speed up for those wide-open valleys. You’ll feel the G’s like you never could before.

Perfect for Trails
Get 4” portals and a 15% gear reduction on your Maverick X3 and take on the trail less traveled. You’ll fly through the trail and clear those technical hills or washouts easily thanks to that extra torque. It’ll show you what your UTV can really do.  

Learn more about how tire size and gear reduction can unleash your machine’s potential.

Better Gears
Our gears are precision ground gears are made with billet 9310 steel alloy for high strength and high speed. That means they’re cool and quiet even when you’re hammering down the throttle on the road. With fully sealed cast or billet aluminum boxes, nothing gets in or out, so your gears stay pristine for years.  

Billet Housings
Choose billet or cast aluminum housings to finish your portals. Our billet housings are CNC machined right here in Madison, Indiana and give you increased strength and consistency over cast. Not to mention they look damn good.

Can-Am Maverick X3 Portal Gear Reduction Recommendations
Tire Size Required Suspension Setup with 4" Portals Recommended 4" Portal Gear Reduction
Up to 32" Stock 15%
Up to 32" 3" Lift Kit 15%
Gear reductions listed are general guidelines to maintain factory top speed. Installing a larger than recommended gear reduction will result in extra torque and lower top speed. Give us a call for more information.

Fitment

  • Can-Am Maverick X3 900 64": 2018+
  • Can-Am Maverick X3 Turbo 64": 2017+
  • Can-Am Maverick X3 Turbo R 64” : 2017+
  • Can-Am Maverick X3 X DS Turbo R 64” : 2017+
  • Can-Am Maverick X3 X RC Turbo 64” : 2018+
  • Can-Am Maverick X3 X MR Turbo 64” : 2018+
  • Can-Am Maverick X3 MAX Turbo 64” : 2017+
  • Can-Am Maverick X3 MAX Turbo R 64” : 2017+
  • Can-Am Maverick X3 MAX X DS Turbo 64” : 2017+
  • Can-Am Maverick X3 X RC Turbo R 72” : 2018+
  • Can-Am Maverick X3 X RS Turbo R 72” : 2017+
  • Can-Am Maverick X3 X MR Turbo R 72” : 2018+
  • Can-Am Maverick X3 MAX X RS Turbo R 72” : 2017+

Features

  • Available with billet or cast aluminum housing
  • Cool, quiet, precision ground gears made from 9310 alloy billet steel
  • 1.5 in. diameter 4340 hardened steel drive shaft
  • No Leak Bearings and Seals
  • Universal Hub Fits All Major bolt patterns
  • Comes complete with all hardware, backing plates, brakes lines and instructions
Wheel Requirements:
  • 14” or larger wheel required
  • 14” wheels cannot exceed 4-1/2” backspacing 
  • 15” wheels cannot exceed 5” backspacing
  • Not compatible with dual beadlock wheels
Other Portal Options:
Can-Am Maverick X3 | 6" Portal Gear Lift (30% or 45% Gear Reductions)
Warranty
Limited Lifetime Warranty

When filling gear box use only 80W-90 gear oil. Using grease will cause failure of gears and bearings. Using grease will void your warranty.

SuperATV extends the following limited lifetime warranty. This limited warranty extends only to the original purchaser. SuperATV warrants this product and its parts (excluding bearings, seals, & gaskets). Warranty is limited to material and / or workmanship defect at the time of shipment from the factory, and in no event shall seller have any liability for consequential damages of any kind resulting from a breach of this warranty. This warranty will be void on all products that show evidence of misapplication, improper installation, abuse, lack of proper maintenance, negligence, or alteration from original design. This warranty is in lieu of any other warranties, either expressed or implied, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTIBILTY OR FITNESS FOR ANY PARTICULAR PURPOSE.

Procedures for obtaining warranty service:

Should you have any problems with your Gear Driven Performance product, please call SuperATV Customer Service at 855-743-3427. Please have a copy of your original purchase receipt available, with dealer name (if applicable), date of purchase, and invoice number when calling for technical help. Most often, installation, or break in procedural issues (See break in procedure information, located in the instructions) can be handled quickly by speaking with one of our customer service representatives.

If it is determined that repairs are required to your Gear Driven Performance portal, you MUST acquire an RGA number from our customer service team. RGA's and repair services are ONLY rendered by SuperATV. Any shipping costs incurred after 30 days (starting from the original purchase date) on any Portal returned for repair is the customer's responsibility. ALL Portals must be returned in the original box, with the original packaging, or a similarly well protected box. ALL portals must have the RGA number clearly written on the outside of the package. NO COD packages will be accepted, and no package will be accepted without an RGA number written on the outside of the box. Shipping information, including address and method, will be given to you by our customer service team and/or listed on our website when you create your RGA.

Upon arrival of your warranty parts we will have them inspected by our technicians to determine if the damage was a manufacturing defect or rider/installation error. The inspection usually takes place 1-2 days after the package arrives. SuperATV will then call you with the results of the inspection. Depending on the outcome of the inspection, you may be required to pay a replacement fee for the broken parts (prices may vary depending on parts that need to be replaced). We do our best to get your issues corrected as soon as possible so you can get back out on the trails. We also match shipping labels for our customers. If you ship the warranty parts to us with an overnight label, we will return the favor and send you the replacements parts on an overnight shipment at no charge.

Replacement bearings, seals and gaskets can be found at www.SuperATV.com.

Thank you for your business!