CFMOTO ZForce Z10 Atlas Pro 1.5" Forward Offset A-Arms

Massive Strength Meets Maximum Clearance
Take your CFMOTO ZForce Z10 to the next level with SuperATV’s Atlas Pro High-Clearance A-Arms. These aren’t ordinary control arms—they’re built to be bigger, bolder, and stronger. With a 1.5” forward offset and a high-clearance bend, you’ll tackle rough terrain with greater stability, more clearance, and tons of durability. Plus, they give you room to run up to 32” tires with stock wheels, no lift required.

Atlas Pro Durability
We didn’t just step up the strength—we went all in. These arms are made with massive 1.5” diameter steel tubing and feature 1/4” thick walls on crucial structural sections. That’s the biggest and thickest tubes you can get on a Z10 A-arm. That’s beefy enough to handle punishing terrain and heavy loads without flexing. For lasting good looks and corrosion resistance, every set is finished with UV-resistant powder coating.

Extra Clearance for Bigger Tires
The 1.5” forward offset gives you a longer wheelbase for more stability and room for bigger tires. You can fit up to 32” tires with stock wheels or 35” tires using wheels with less than 3.5” of backspacing—all without a lift. And you get 1.5” of extra ground clearance thanks to the high-clearance bends, so you can cruise over obstacles without getting hung up.

Custom Camber Control
Bigger tires, lifts, added accessories—they can all impact your camber. Our adjustable pivot blocks let you fine-tune your camber for perfect alignment and reduced tire wear. They’re pre-adjusted to factory specs on arrival, so you can install and ride right away.

Add UHMW Bushings
Upgrade to our UHMW bushings to make this a complete upgrade. Our UHMW bushings come with all the bushings and sleeves you need, plus a press tool to make installation easy. UHMW is ultra durable and self-lubricates, so you keep running smooth ride after ride.

Let SuperATV Do the Work—Preassembly Available!
Want to spend more time on the trails and less time in the garage? Purchase a set of SuperATV ball joints with your A-arms, and we’ll install them for you for free! We save you money and time so you can get back to doing what you love.

NOTE: You must reuse your stock ball joints if you don’t select a pre-installed ball joint at checkout.

Keller Ball Joints
Keller Ball Joints use a two-piece design that eliminates the need for a snap ring. They thread onto your A-arms like a nut and bolt, which makes these ball joints virtually impossible to pull out. The high-quality chromoly steel stud combined with an advanced tool-steel body makes them perfect for bigger machines, bigger tires, and bigger rides. And since they’re greaseable and rebuildable, you can keep them running perfectly.

Heavy Duty Ball Joints
Our heavy-duty ball joints are designed with ultimate performance and convenience in mind. Whether you’re doing flips or chasing hills, our proprietary blend of hardened 4340 VAR steel and zinc plating means this ball joint can take it. Our heavy-duty ball joints also come with easily accessible grease zerks and an adjustable design. Extensive lab and field testing show that our heavy-duty ball joints can withstand double the pressure of an OEM ball joint!

Super Duty 300M Ball Joints
We took the strongest ball joint material on the market—300M grade steel—and combined it with our superior design engineering to make the strongest ball joint on the market. It comes with an easily accessible grease zerk and an adjustable steel-on-steel design, making it easy to keep your ball joints maintained and flexible. At 2.25x stronger than stock, you won’t find a better ball joint.