Polaris RZR XP Turbo 3" Long Travel Kit—Chromoly Tubed



Polaris RZR XP Turbo 3" Long Travel Kit—Chromoly Tubed

Why We Make It
SuperATV has taken years of engineering and design experience to deliver a new breed of long travel kit. This 3” long travel kit for the Polaris RZR Turbo is designed to give you unmatched stability and extreme durability. We take this kit over the top by utilizing our one-of-a-kind ball joint designs. 2016 models make use of Uniball Ball Joints and 2017+ models use threaded ball joints. SuperATV's Rev1 performance line of chromoly tubed A-arms are constructed of a precise blend of high-strength steel alloy then hand welded and features 25% larger tubing! Through our unique dual bend design, SuperATV arms give you even more clearance giving this kit 2” total ground clearance over stock! It will take you over obstacles that would have once hung you up and ended your fun.

Threaded Ball Joints are 3x Stronger Than Stock
Our threaded ball joints are 3x stronger than stock. How? We use heavy-duty 4340 steel and a stud design that doesn’t taper down like stock. We take it over-the-top by making it thread in easily to our A arms without the need for a hydraulic press. They use M38 threads and secure it with loc-tite and a snap ring so they stay in you’re A arm even under extreme abuse. That’s how we make it 3x stronger than stock. Some might call it overkill—we call it good enough.

The UniBall and Stud
To ensure a bullet proof design, our A arms are paired with a 4130 chromoly uniball. Pair top of the line materials with a stud that is 140% larger than OEM, and you've got a long travel kit that is Built for Battle. Important to note that the SuperATV uniball studs are not necked down; they measure 17.9 mm compared to the OEM ball joint stud at 12.7. With a larger stud and meticulously heat treated materials, you have a uniball that is 2x stronger than your stock ball joint.

Strength and Durability
With structural integrity that gives you the confidence to blast the whoops or take on the most heart thumping of hills, SuperATV control arms are constructed of high strength chromoly steel. Backed by the SuperATV lifetime warranty, these chromoly arms for the RZR Turbo are guaranteed to take anything you can throw at them.

Kit Includes:
  • (4) Rhino Brand Axles
  • (4) Aluminum Hex RSL's
  • (8) Chromoly High Strength Front A Arms
  • (4) Ball Joints—Threaded or Uniball
    • Uniball Ball Joints for 2016 models
    • Threaded Ball Joints for 2017+ models
  • High Strength Rear Trailing Arms
  • Aluminum Hex Sway Bar Link
  • Aluminum Extended Hex Tie Rods & Heavy Duty Tie Rod Ends
  • New Springs (use stock shocks)
  • Extended Brake Lines and Tie Rods
  • New uniball and stud (replaces factory ball joints)
  • All Necessary Hardware For Easy Install

Front Springs
Top Specs 5x3x50
Bottom Specs 12x3x250

Rear Spring
Specs 16x3x350


  • Polaris RZR XP Turbo : 2016+
  • Polaris RZR 4 XP Turbo : 2016+
  • 1" wheel spacer required with factory wheels.
  • Does not work with RZR XP Turbo factory front sway bar.
  • To use a sway bar on a 2016 RZR XP Turbo, you must use our optional front sway bar bumper.
  • 2017+ models may work with other sway bar bumpers
  • Features

    • Adds 3" to each side of your RZR XP Turbo (6" overall)
    • Max tire size: 33"
    • Increased wheel Travel
      • Front: 3"
      • Rear: 2"
    • Offset
      • Front: 0"
      • Rear: 2"
    • Ground Clearance
      • Front: 2"
      • Rear: 1"
    • Fully adjustable pivot joints
    • Full camber adjustability
    • Lifetime warranty on all arms
    • Optional Front Sway Bar Bumper for 2016 RZR XP Turbo
    SuperATV provides the finest A Arms in the market and offers a LIFETIME WARRANTY to go with it. If for any reason an arm bends, breaks, or fails we will replace it free of charge. Whether you pile it up or your buddy took it for an innocent test ride, we've got you covered.

    Ball joints and tie rod ends are considered wear and tear items and do not carry a lifetime warranty.

    Please note: All SuperATV products are warrantied to the original purchaser.

    How to make a warranty claim? Before sending anything to SuperATV, please click below to fill out the appropriate form:



    Complete the form, ensuring each field is properly filled out. Follow instructions on each page for the warranty or return process.
    Customer is responsible for shipping item back to SuperATV and is responsible for tracking information. Please keep until a SuperATV team member has contacted you.
    Custom/special orders, including A Arms with Pre-Installed Ball Joints, are returnable and will be assessed a base restocking fee of 20%.