Polaris RZR XP 1000 8” Portal Gear Lift

SKU
PGH8-1-33-PORTAL-1000
$3,899.95
 

Details

Gear Down and Go Big
We know you like to go big, and it doesn’t get any bigger than an 8” GDP Portal Gear Lift. That’s a heck of a lot of room for some huge tires and a ton of torque thanks to the 45% gear reduction. Your Polaris RZR XP 1000 will feel like a whole new machine when you’re towering over the competition and throwing up rooster tails better than anybody else.

GDP—the Most Trusted Name in Portals
What makes GDP so good? Ask the thousands of riders out on the trail today rocking GDP portals. With hundreds of thousands of ride hours, there’s no portal lift in the industry that’s more used and more trusted. More riders roll on GDP than any other portal system. If you want trail-proven fortitude, you want GDP.

Perfect for Mud
What’s the first thing you need if you’re serious about mud? A big lift. The second thing? Some big Assassinator Tires of course and the gear reduction to turn them. Our 8” portals have got you covered. You’ll have room to install up to 40” tires and a 45% gear reduction to give you punchy torque to turn them. That way, you can push through and ride over deeper, thicker mud holes and take home the bounty.

A Gear Reduction That Protects Your Drivetrain
Portals put the gear reduction right in the hub. That puts it after your entire drivetrain and it makes your drivetrain work less and wear less. That means more miles out of your axles, differential, transmission, and prop shafts.

Learn more about how tire size and gear reduction can unleash your machine’s potential.

Better Gear Material
At the heart of a portal gear lift are, well, gears. That’s why we made the best gears we could. They’re made with precision-ground 9310 alloy steel. They’re top-of-the-line gears that make your portals quiet and smooth. We made them unstoppable because that’s how you ride.

Stronger Housings by Design
GDP housings are the strongest housings you can get because we know how to make them tough. We’ve been using them and refining them for years—we know what makes them break and how to make them strong enough to last. Whether you go with cast or USA-made, 6061 billet aluminum (which looks awesome), you’ll get strength built with experience.
  • Our housings are reinforced in all the right places
  • They’re built with better oil flow and gearing forces in mind
  • There are no gimmicks and no vents because vents do more harm than good—we know because we tested them
The Strongest Portal Backing Plates You Can Get
If you want portals that will stand up to years of hard riding and abuse, you need GDP. The backing plates use an advanced steel that you can’t find anywhere else. It’s stronger than chromoly and 5/16” thick—AKA this thing is going to outlast the rest of your side-by-side no matter how you ride.

Advanced Gaskets and Seals
Whether you go with cast or billet, both housings use:
  • Advanced Thermo-Tork® gaskets with excellent oil resistance and a lower deterioration rate than Kevlar gaskets
  • A sealed input gear and double-lipped output seal
  • 100% sealing coverage throughout so you can forget about oil leaks
Bearings That Rock
A bad bearing is the fastest way to ruin your ride. That’s why we went with the best for the output—a double-angular contact bearing that can withstand huge forces from any angle. That means years of hard riding and hard hits with no premature wear. It’s one more way we make sure GDP is the best.

Universal Hubs and Slotted Rotors
Our precision-ground, stainless steel slotted rotors stay cool to give you the braking power you need when you need it. They come with 4/156, 4/137, 4/115, and 4/110 bolt patterns and lugs—you can fit wheels built for almost any side-by-side on these hubs. We made them that way to make your life easier. We invented the tapered output shaft that our hubs attach to. It provides a more secure lock that won’t wobble or wear over time.

Reinforce Your UTV with a Frame Stiffener
We highly recommend running a SuperATV Frame Stiffener with your 8" Portal Gear Lift. The stock frame just doesn't have what it takes. Bump too hard and the OEM frame will bend. Trust us—we've done it. A frame stiffener reinforces your frame enough to let you ride your 8" portals with monster tires and no worries.

Top-Rated Customer Service
Still need a little help getting exactly what you need? We’ve got a dedicated team just for portal support. Give us a call so we can get the perfect set of portals in your hands today.

8” Portal Gear Lift Includes:
(4) Assembled portal hub boxes complete with 9310 gears, seals, output shaft, Thermo-Tork® gaskets, and thrust bearings
(4) Universal hubs and precision-ground stainless steel slotted rotors with lugs
(4) Specialized steel alloy backing plates
(4) Steel caliper mounting plates
(2) Caliper adapter plates
(2) Steel steering arms
Extended brake lines
All required hardware, including recessed castle nut socket


Polaris RZR XP 1000 Portal Gear Suspension Recommendations
Max Tire Size Required Suspension Setup with 8" Portals
40" Stock
42" 1.5" Forward Front A-Arms
44" 1.5" Forward Front A-Arms and 3" Lift Kit
50" 7-10" Lift Kit
Gear reductions listed are general guidelines to maximize torque and maintain factory top speed. A larger than recommended gear reduction will result in more torque and lower top speed. Give us a call for more information.

Fitment

  • Polaris RZR XP 1000 : 2014+
  • Polaris RZR XP 1000 High Lifter Edition : 2015+
  • Polaris RZR XP 4 1000 : 2014+

Features

  • Available with billet or cast aluminum housing
  • Cool, quiet, precision ground gears made from 9310 alloy billet steel
  • 1.5 in. diameter 4340 hardened steel drive shaft
  • 1.5 in. forward and rear offset
  • Housings use Thermo-Tork® gaskets that don’t let anything through
  • Universal hub fits all major bolt patterns
  • Gear reduction reduces stress on your drivetrain
Wheel Requirements:
  • 22" or larger wheel required
  • Wheels cannot exceed 5" backspacing
Warranty
Limited Lifetime Warranty

When filling gear box use only 80W-90 gear oil. Using grease will cause failure of gears and bearings. Using grease will void your warranty.

SuperATV takes pride keeping your GDP Portal Gear Lift in working order. That’s why we give you, the original purchaser, a lifetime of portal protection contingent on the following conditions. SuperATV warrants this product and its parts (excluding bearings, seals, & gaskets). Warranty is limited to material and / or workmanship defect at the time of shipment from the factory, and in no event shall seller have any liability for consequential damages of any kind resulting from a breach of this warranty. This warranty will be void on all products that show evidence of misapplication, improper installation, abuse, lack of proper maintenance, negligence, or alteration from original design. This warranty is in lieu of any other warranties, either expressed or implied, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTIBILTY OR FITNESS FOR ANY PARTICULAR PURPOSE.

Procedures for obtaining warranty service:

Should you have any problems with your Gear Driven Performance product, please call SuperATV Customer Service at 855-743-3427. Please have a copy of your original purchase receipt available, with dealer name (if applicable), date of purchase, and invoice number when calling for technical help. Most often, installation, or break in procedural issues (See break in procedure information, located in the instructions) can be handled quickly by speaking with one of our customer service representatives.

If it is determined that repairs are required to your Gear Driven Performance portal, you MUST acquire an RGA number from our customer service team. RGA's and repair services are ONLY rendered by SuperATV. Any shipping costs incurred after 30 days (starting from the original purchase date) on any Portal returned for repair is the customer's responsibility. ALL Portals must be returned in the original box, with the original packaging, or a similarly well protected box. ALL portals must have the RGA number clearly written on the outside of the package. NO COD packages will be accepted, and no package will be accepted without an RGA number written on the outside of the box. Shipping information, including address and method, will be given to you by our customer service team and/or listed on our website when you create your RGA.

Upon arrival of your warranty parts we will have them inspected by our technicians to determine if the damage was a manufacturing defect or rider/installation error. The inspection usually takes place 1-2 days after the package arrives. SuperATV will then call you with the results of the inspection. Depending on the outcome of the inspection, you may be required to pay a replacement fee for the broken parts (prices may vary depending on parts that need to be replaced). We do our best to get your issues corrected as soon as possible so you can get back out on the trails. We also match shipping labels for our customers. If you ship the warranty parts to us with an overnight label, we will return the favor and send you the replacements parts on an overnight shipment at no charge.

Replacement bearings, seals and gaskets can be found at www.SuperATV.com.

Thank you for your business!
Instructions