Polaris Ranger 900 6" Portal Gear Lift

SKU
PGH6-1-34-PORTAL#RN-G3
$3,399.95
 

Details

Gen 3 Portals are Geared for All
Your Ranger 900 is a workhorse, but we all know it’s got an untapped wild side. That’s where SuperATV’s 6” GDP Portal Gear Lift comes in. When you get crazy ground clearance and a 30 or 45% gear reduction that boosts your power to the ground, you can turn your mild Ranger into a wild party wagon. Ride the way you want, and let GDP take you where you couldn’t go before.

GDP—the Most Trusted Name in Portals
More riders roll on GDP than any other portal system. That means there are thousands of riders in trails and parks all over the world counting on GDP to make their weekend awesome. With so many miles on portals, you can bet they’re real-world proven.

Perfect for Mud
With portals, the deeper you go, the more your torque will impress you. That gear reduction will push you through anything, and the 6 inches of extra ground clearance will keep you from getting swamped.

A Gear Reduction That Protects Your Drivetrain
Portals put the gear reduction in the hub instead of the transmission, so it reduces the stress on your axles, differential, prop shaft, and transmission. That means your components will last longer than a stock machine. Yes, really. Ride hard—your machine won’t mind.

Learn more about how tire size and gear reduction can unleash your machine’s potential.

Unmatched Gear Material
The most important part of a gear lift is, of course, the gears. We went all out to deliver the most premium, top-of-the-line gears we could. They’re precision ground to ensure perfect meshing which results in quieter portals even when you ride hard. Plus, they’re made of the toughest gear material we could get—9310 alloy steel.

Stronger Housings by Design
We know a thing or two about making housings—we’ve made thousands of them after all. We have the design experience to make housings that can handle the internal and external torque loads and huge hits you get from normal riding. So whether you choose beautiful, USA-made billet aluminum or cast aluminum housings, you know you’re getting the best you can get.
  • Our housings are reinforced in all the right places
  • They’re built with better oil flow and gearing forces in mind
  • There are no gimmicks and no vents because vents do more harm than good—we know because we tested them
The Strongest Portal Backing Plates You Can Get
We start with an advanced steel alloy that’s stronger than chromoly, then we make it 5/16” thick. What does that get you? The strongest portal backing plates on the planet. These brutes are beefed up with hand-welded gussets, strategic stiffening bends, and forged pivot blocks. Don’t settle for less—we sure didn’t.

Advanced Gaskets and Seals
Whether you go with cast or billet, both housings use:
  • Advanced Thermo-Tork® gaskets with excellent oil resistance and a lower deterioration rate than Kevlar gaskets
  • A sealed input gear and double-lipped output seal
  • 100% sealing coverage throughout so you can forget about oil leaks
Bearings That Rock
We didn’t forget about the bearings because we know that a portal box is only strong if every part of it is strong. Our output bearing is a double-angular contact bearing that’s built to handle you plowing into rocks and stumps without wearing out. For the idler gear, we use roller bearings that are much stronger than standard bearings because they have to deal with massive torque. Every last detail is built to be abused.

Universal Hubs and Slotted Rotors
Our precision-ground, stainless steel rotors are slotted to stay cool so you get the braking power you need when you need it. Our universal hubs are convenient and practical with 4/156, 4/137, 4/115, and 4/110 bolt patterns and lugs—you can fit wheels built for just about any side-by-side in the world on these hubs. We invented the tapered output shaft that our hubs attach to. It provides a more secure lock that won’t wobble or wear over time.

Top-Rated Customer Service
Still need a little help getting exactly what you need? We’ve got a dedicated team just for portal support. Give us a call so we can get the perfect set of portals in your hands today.

6” Portal Gear Lift Includes:
(4) Assembled portal hub boxes complete with 9310 gears, seals, output shaft, Thermo-Tork® gaskets, and thrust bearings
(4) Universal hubs and precision-ground stainless steel slotted rotors with lugs
(4) Specialized steel alloy backing plates
(4) Steel caliper mounting plates
(2) Steel steering arms
Extended brake lines
All required hardware, including recessed castle nut socket


Polaris Ranger XP 900 Portal Gear Reduction Recommendations
Tire Size Required Suspension Setup with 6" Portals Recommended 6" Portal Gear Reduction
Up to 30" Stock 30%
31" 3" Lift Kit 30%
32" to 33" 1.5" Forward Front A-Arms 30%
34" 1.5" Forward Front A-Arms and 3" Lift Kit 30%
35" to 38" 6" Lift Kit 45%
Gear reductions listed are general guidelines to maximize torque and maintain factory top speed. A larger than recommended gear reduction will result in more torque and lower top speed. Give us a call for more information. 

Fitment

  • Polaris Ranger 900 : 2013+
  • Polaris Ranger 900 Crew : 2014+
NOTE:
  • Will Not fit the 2016 Ranger 900 Diesel
  • Frame stiffener does NOT fit High Lifter Edition

Features

  • Available with billet or cast aluminum housing
  • Cool, quiet, precision-ground gears made from 9310 alloy billet steel
  • 1.5 in. diameter 4340 hardened steel drive shaft
  • Housings use Thermo-Tork® gaskets that don’t let anything through
  • Universal hub fits all major bolt patterns
  • Gear reduction reduces stress on your drivetrain
  • Weighs 224 lb. total, which is 25+ lb. lighter than the competition
Wheel Requirements:
  • 18” or larger wheel required
  • Cannot exceed 5” backspacing
Warranty
Limited Lifetime Warranty

When filling gear box use only 80W-90 gear oil. Using grease will cause failure of gears and bearings. Using grease will void your warranty.

SuperATV takes pride keeping your GDP Portal Gear Lift in working order. That’s why we give you, the original purchaser, a lifetime of portal protection contingent on the following conditions. SuperATV warrants this product and its parts (excluding bearings, seals, & gaskets). Warranty is limited to material and / or workmanship defect at the time of shipment from the factory, and in no event shall seller have any liability for consequential damages of any kind resulting from a breach of this warranty. This warranty will be void on all products that show evidence of misapplication, improper installation, abuse, lack of proper maintenance, negligence, or alteration from original design. This warranty is in lieu of any other warranties, either expressed or implied, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTIBILTY OR FITNESS FOR ANY PARTICULAR PURPOSE.

Procedures for obtaining warranty service:

Should you have any problems with your Gear Driven Performance product, please call SuperATV Customer Service at 855-743-3427. Please have a copy of your original purchase receipt available, with dealer name (if applicable), date of purchase, and invoice number when calling for technical help. Most often, installation, or break in procedural issues (See break in procedure information, located in the instructions) can be handled quickly by speaking with one of our customer service representatives.

If it is determined that repairs are required to your Gear Driven Performance portal, you MUST acquire an RGA number from our customer service team. RGA's and repair services are ONLY rendered by SuperATV. Any shipping costs incurred after 30 days (starting from the original purchase date) on any Portal returned for repair is the customer's responsibility. ALL Portals must be returned in the original box, with the original packaging, or a similarly well protected box. ALL portals must have the RGA number clearly written on the outside of the package. NO COD packages will be accepted, and no package will be accepted without an RGA number written on the outside of the box. Shipping information, including address and method, will be given to you by our customer service team and/or listed on our website when you create your RGA.

Upon arrival of your warranty parts we will have them inspected by our technicians to determine if the damage was a manufacturing defect or rider/installation error. The inspection usually takes place 1-2 days after the package arrives. SuperATV will then call you with the results of the inspection. Depending on the outcome of the inspection, you may be required to pay a replacement fee for the broken parts (prices may vary depending on parts that need to be replaced). We do our best to get your issues corrected as soon as possible so you can get back out on the trails. We also match shipping labels for our customers. If you ship the warranty parts to us with an overnight label, we will return the favor and send you the replacements parts on an overnight shipment at no charge.

Replacement bearings, seals and gaskets can be found at www.SuperATV.com.

Thank you for your business!